Nema Socket

The Cree NEMA® 7-pin receptacle with its “Tool-Less” entry is ideal for your next generation Smart City solution.

19_1

Area Download

1-10V – Dimmable Driver

The dimming option D allows multiple operating drive currents, conveniently balancing LED life, lumen output and energy savings.
The dimming option operates all LEDs at the same current for maximum and uniform LED life.

 

Area Download

Field Adjustable Output

The Field Adjustable Output option enables the street and area luminaire within the XSP, OSQ and Ledway Series to be tuned to the exact light emission needs of a particular application through multiple levels of adjustment, directly on field.

 

Area Download

Option Virtual Midnight

Cree products may be provided with a dimmer device of two power levels that may be directly set by Cree and subsequently programmed by the installer or the end client based on calculation of so-called virtual midnight. This integrated device, thereby requiring no modification of the system by the installer. Programming can be easily modified by the end user at any time.

19_1

 

Area Download

Option Reprogrammable Virtual Midnight

Cree Ledway Series and Cree XSP Series products may be provided with a dimmer device of two power levels that may be directly set by Cree and subsequently programmed by the installer or the end client based on calculation of so-called virtual midnight. This integrated device thereby does not require any modification of the system by the installer. Programming can be easily modified by the end user at any time, even after installation; through a simple sequence of switching on and switching off, it is possible to reprogramme the fixture based on specific needs of desired switching time and dimming.

19_1

Lumistep

The Lumistep is a stand-alone system, a basic version of Virtual Midnight. Through the first few cycles of switching on and switching off, the device determines a hypothetical virtual midnight value. Based on this value the system regulates the fixture to the low level of dimming (default set to 50% power).

19_1

 

Area Download

Bi-Level Option – LineSwitch

The bi-level option allows the fixture to operate at two distinct power levels (Low/High mode) via the use of an additional power cable.

In the same way, the LineSwitch is a one-step-dimming solution integrated in the driver, which enables users to dim (to a predefined level) groups of light points, with only one push of a button. The LineSwitch feature too works by using the pilot line extra wire.

The benefit provided by these two options is the flexibility to dim up and down at any point – with no timing constraint.

19_1

 

Area Download

DynaDimmer

The DynaDimmer is a control system for the lighting fixtures regulation. We can set up a regulation profile with up to 5 different levels, based on the virtual midnight, calculated automatically by the device in the first 3 days of operation.

19_1

 

Area Download

CLO – Constant Lumen Output

The task of the CLO is to fight the natural decay of the LEDs’ light output.

19_1

Area Download

Option for pilot current regulation by occupancy sensor

The occupancy sensor controls lighting by dimming it or turning it on or off based on the occupancy and ambient light levels. The ambient level feature can be used to keep the lights from turning high level on if the ambient light level is sufficient.

19_1